Skip to main content

Slurries and Abrasives

 
 

Slurries and Abrasives

 

Hydra-Cell® seal-less design enables reliable pumping of slurries and abrasives

Slurries and abrasive liquids can present major challenges to pumps.

Reducing or eliminating rotating parts in the process liquid can help improve reliability and cost of ownership, especially with fine particles in the slurry as these can damage clearances between rotating particles. Increasing these clearances reduces the efficiency of the pumping action as the flow rate falls off. If the duty of the pump is to meter a constant flow rate in the process then the process quality is affected. All these challenges increase as the discharge pressure increases.

The Hydra-Cell pump design, with the combination of the seal-free and packing-free design, with no rotating dynamic seals and with spring-loaded disc valves, results in a pumping action that reduces maintenance and servicing costs when pumping abrasive liquids.

 
 

Hydra-Cell® Seal-less Pumps Reliably Handle Slurries & Abrasives

 
 
 
 
  • Acidic Solutions
  • Acids
  • Adhesive Emulsion
  • Algae Solution
  • Alumina Slurry
  • Animal Fats
  • Aqueous Emulsion
  • Bentonite
  • Benzol
  • Bio Oil
  • Brackish Water
  • Brine Solution
  • Calcium Carbonate
  • Carbon Hydrogen Concentrate
  • Catalyst
  • Catalyst Slurry
  • Celite
  • Ceramic Slurry
  • Chalk
  • Cleaning Solution
  • Coal Tar Oil
  • Cocoa Mass
  • Coolant (5% emulsion)
  • Co-produced Water
  • Crude Oil
  • Cutting Oil
  • Dextrose
 
 
  • Diesel Oil
  • Dye
  • Enprep 576E
  • Ethyl Lactate
  • Euro III / Euro IV Blended Diesel
  • Fermented Wine
  • Food Colours
  • Formalin
  • Formation Water
  • Furnace Oil
  • Grinding Fluid
  • Ground Lead Slurry
  • Grouting Cement Mix
  • HFA Fire Resistant Hydraulic Fluid
  • Isocyanates
  • Latex
  • Leachate
  • Lecithin
  • Lime Slurry
  • Liquid Wastewater
  • Machine Tool Coolant
  • Magnesium Peroxide Solution
  • Malt
  • Mannitol
  • Methanol and Glycol (MEG)
  • Microcement
  • Monomers
 
 
  • Motor Spirit Fuels
  • Mud Slurry
  • Naphtha
  • Nitric Acid (HNO3)
  • Oil Emulsion
  • Phosphate
  • Phosphoric Acid
  • Photographic Wash Water
  • Polyacrylamide
  • Polyol
  • Polyol (Filled 70%)
  • Polyvinyl Alcohol (PVA)
  • Potash
  • Printing Ink
  • Produced Water
  • Proprietary Liquids
  • Rape Seed Oil
  • Recycled Detergent
  • Recycled Solvents
  • Recycled Water
  • Resins
  • Roof Tar Emulsion
  • Salt Water
  • Sapphire Dust
  • Seawater
  • Silica Carbide Grit (in water)
  • Sodium Chloride
 
 
  • Sodium Hydroxide
  • Sodium Silicate
  • Solvent Slurry
  • Solvent Waste
  • Sour Water
  • Soured Water
  • Soya Oil
  • Starch Glue
  • Sugar Solution
  • Sulphuric Acid
  • Synthetic Emulsion
  • Synthetic Grinding Coolant
  • Terpene
  • Titanium Dioxide
  • Titanium Oxide
  • Treated Effluent Water
  • Tri-Ethylene Glycol (TEG)
  • Turpentine
  • Urea
  • Urethane
  • Viscous Resins
  • Waste Oil
  • Water (with High TDS)