Skip to main content
 

Hydra-Cell® Pumps in Gas Processing Applications

 
 
 
 
 
 
 
 
 
 
 

Hydra-Cell Pump Advantages

  • No seals and no packing
  • Reliably pumping corrosive liquids
  • Zero leakage
  • Large pump RPM range from 0 to maximum
  • Lowest operating costs
  • High efficiency > 90%, low energy consumption
  • Minimal servicing costs
  • Elimination of forced lubricating or lubrication unit
  • Simple low cost installation
 

Accurately and Reliably Handling Your Process Liquids - Economy through Technology

With the seal-less, packing-less design, Hydra-Cell® pumps safely, accurately and reliably handle many liquids. Dynamic seals and packing account for approximately 80% of pump servicing and unplanned maintenance, especially when handling non-lubricating, abrasive, corrosive liquids and liquids with micron-sized particles. Eliminating dynamic seals and packing significantly reduces the cost of ownership.

 
 
 
 
 
 
 

Amine
Antifouling Agents
Asphalt inhibitors
Biocides
Brine Solution
Butane
Calcium Nitrates
Carbon Hydrogen Concentrate
Clarifiers for Water
Condensate
Co-produced Water
Corrosion Inhibitor
Corrosion inhibitors
Crude Oil
Crust Reducers
Demulsifiers
Diesel
Diesel Oil
Emulsion
Emulsion breakers
Euro-IV MS

Foam inhibitors
Formation Water
Friction reducers
Glycol (MEG/TEG)
H2S binders
High Speed Diesel (HSD)
Hot Water
Hydrate inhibitors
Hydrocarbon Condensate
Hydrocarbons
Hydrogen Peroxide
Hypochlorites
Liquid Gasoline
Liquid Petroleum Gas (LPG)
Methane
Methanol
Methanol and Ethanol
Methanol and Glycol (MEG)
Monoethanolamine
Mono-Ethylene Glycol
Naphtha

Natural Gas Liquids
Oil
Oil Separators/Flocculants
Oxygen Binders
Paraffin Inhibitors
Petroleum
PH Control Agents
Polyelectrolytes
Polymer
Polystyrol
Produced Water and Waste Oil
Propene
Recycled Water
Salt Water
Salt Water & Sand
Soured Water
Treated Effluent Water
Tri-Ethylene Glycol (TEG)
Water
Wax Inhibitors