No Seals No Packing

The pumped liquid is 100% contained with Hydra-Cell®, eliminating:

• Emission of VOCs (volatile organic compounds)
• Ground contamination around the pump
• Emission of dangerous chemicals

With no dynamic seals in the pumped liquid, the Hydra-Cell® Metering and Dosing pump does not rely on the properties of the liquid to:

• Lubricate the pumping action
• Form a seal to maintain pressure

This results in the Hydra-Cell® Metering and Dosing pump's ability to pump very thin, non lubricating liquids at high pressure reliably.

The pumping action of the Hydra-Cell® Metering and Dosing pump does not need the liquid to lubricate seals or packing during the pumping action enabling it to run dry….forever.

The Hydra-Cell® Metering and Dosing pump can survive mistakes made by operators running the pump without liquid. 

Many liquids are degraded by exposure to air and moisture. The Hydra-Cell® Metering and Dosing pump keeps the process liquid 100% contained keeping the process liquid in good condition contributing to a consistent produced product.

There are many common corrosive liquids used in industrial processes such as Hydrochloric, Sulphuric, Nitric acids, De-ionised water. But also common liquids can become very corrosive as the temperature increases. So even water at 90°C becomes a corrosive liquid.

The Hydra-Cell® metering pumps seal-free packing-free design makes it an ideal choice for dosing corrosive liquids for:

• Pressure injection
• Transfer
• Metering and dosing

The presence of suspended undissolved solids in a pump liquid is more common than you may think.

• Supersaturated liquids used in spray drying
• Resins and isocyanates, caustic, phosphate and acidic solutions can form very small hard crystals when exposed to humidity or air
• Solids pick up from corroded pipes and tanks

It is often the small, sub 5 micron solids that do the most damage to dynamic seals and are very hard and expensive to filter out.

Seal flushing is eliminated saving cost of installation and running costs

The Hydra-Cell® pumps seal-free and packing-free design combined the special valve design ensures reliability when pumping liquids with suspended solids.