Wanner Engineering Inc.
World Headquarters & Manufacturing
1204 Chestnut Avenue,
Minneapolis, MN 55403 USA
Tel (612) 332-5681
Fax (612) 332-6937
Toll Free Fax (USA only) (800) 332-6812
https://www.hydra-cell.com/
Email: sales@wannereng.com
Texas USA
207 US Highway 281
Wichita Falls, TX 76310
USA Phone: 940-322-7111
Toll-Free: 800-234-1384
Email: sales@wannereng.com
Latin American Office
Avenida Senador Vergueiro 608 – Centro
São Bernardo do Campo – São Paulo
ZIP CODE – 09750-000
Tel: +55 (11) 99582.1969
http://hydra-cell-pumps.com.br
Email: mmagoni@wannereng.com
Wanner International Ltd.
United Kingdom
8 / 9 Fleet Business Park
Sandy lane, Church Crookham
Hampshire GU52 8BF England
Tel: +44- 01252-816847
Fax: +44- 01252-629242
Email: sales@wannerint.com
Wanner Pumps Ltd.
Hong Kong
Flat A, 21 F Chatham
Commercial Building 399
Chatham Road North Hunghom,
Kowloon, HONG KONG
Tel. (852) 3428-6534
Fax: (852) 3188-9145
Email: sales@wannerpumps.com
PERFORMANCE SUMMARY
| Max Discharge Pressure: | |
| Up to 70 Bar @ 1450 rpm Metallic | |
| Up to 103 Bar @ 790 rpm | |
| Up to 24 Bar PVDF | |
| Up to 17 Bar Polypropylene | |
| Max Inlet Pressure: | Up to 17 Bar |
| RPM Range: | 5 rpm to 1450 rpm |
| Flow Range: | 0.09 L/min to 33.4 L/min |
AVAILABLE OPTIONS
- ATEX
- Electronic Flow Rate Controller for Safe Zone Installations
- Oil Cooler for Hot Duties
- Support face plate in 316L Stainless Steel
- Vertical mounting kit
Hydraulic End:
- Cast Aluminium (Standard)
- Ductile Iron
G10
LIQUID HEAD MATERIALS
Brass
Cast Iron (Nickel-plated)
Duplex Alloy 2205 Stainless Steel
PVDF
Polypropylene
316L Stainless Steel with ANSI RF Flanges
316L Stainless Steel
316L Stainless Steel with Tri-clamp Flanges Hastelloy CW12MW
DIAPHRAGM MATERIALS
Aflas
Buna-N
EPDM
FKM
FFKM / PTFE O-Ring
Neoprene
PTFE
VALVE MATERIALS
Ceramic
Hastelloy C
Nitronic 50
Tungsten Carbide
17-4 Stainless Steel
CONNECTION PORT
| Threaded | |
| Inlet | 1" BSPT |
| Discharge | 3/4" BSPT |
| ANSI (RF) | |
| Inlet | 150lb RF |
| Discharge | 600lb RF |
| Tri-Clamp - Max. 80 bar | |
| Inlet | 1" |
| Discharge | 3/4" |
NOTE:
Tri-clamp Flanges polished to 0.8 or 0.4 Ra
(Includes polishing of Pump Head, Valve Plate, Valves, Valve Seats, Springs & Retainers,
along with TSE, Passivation, Surface Finish & Weld Procedure Certificates)
Downloads
Request a technical support meeting online
CALL +44 (0) 1252 816847