PERFORMANCE SUMMARY
| Max Discharge Pressure: | |
| Up to 70 Bar @ 1450 rpm Metallic | |
| Up to 103 Bar @ 790 rpm | |
| Up to 24 Bar PVDF | |
| Up to 17 Bar Polypropylene | |
| Max Inlet Pressure: | Up to 17 Bar |
| RPM Range: | 5 rpm to 1450 rpm |
| Flow Range: | 0.09 L/min to 33.4 L/min |
AVAILABLE OPTIONS
- ATEX
- Electronic Flow Rate Controller for Safe Zone Installations
- Oil Cooler for Hot Duties
- Support face plate in 316L Stainless Steel
- Vertical mounting kit
Hydraulic End:
- Cast Aluminium (Standard)
- Ductile Iron
G10
LIQUID HEAD MATERIALS
Brass
Cast Iron (Nickel-plated)
Duplex Alloy 2205 Stainless Steel
PVDF
Polypropylene
316L Stainless Steel with ANSI RF Flanges
316L Stainless Steel
316L Stainless Steel with Tri-clamp Flanges Hastelloy CW12MW
DIAPHRAGM MATERIALS
Aflas
Buna-N
EPDM
FKM
FFKM / PTFE O-Ring
Neoprene
PTFE
VALVE MATERIALS
Ceramic
Hastelloy C
Nitronic 50
Tungsten Carbide
17-4 Stainless Steel
CONNECTION PORT
| Threaded | |
| Inlet | 1" BSPT |
| Discharge | 3/4" BSPT |
| ANSI (RF) | |
| Inlet | 150lb RF |
| Discharge | 600lb RF |
| Tri-Clamp - Max. 80 bar | |
| Inlet | 1" |
| Discharge | 3/4" |
NOTE:
Tri-clamp Flanges polished to 0.8 or 0.4 Ra
(Includes polishing of Pump Head, Valve Plate, Valves, Valve Seats, Springs & Retainers,
along with TSE, Passivation, Surface Finish & Weld Procedure Certificates)
Downloads
