Skip to main content
 
 

PERFORMANCE SUMMARY

Max. Discharge Pressure: 
Up to 70 Bar Metallic
Up to 17 Bar Polypropylene
Up to 24 Bar PVDF
Max. Inlet Pressure: 17 Bar
RPM Range: 5 rpm to 840 rpm
NPSHr: 5.5 M(H20) absolute
Flow Range: 20 L/hr - 3950 L/hr

AVAILABLE OPTIONS

  • Control Freak for Multiple Pump Control
  • Electronic Flow Rate Control for Safe Zone Installations
  • Oil Cooler for Hot duties

API 675

Hydra-Cell Metering Solutions pumps meet or exceed API 675 Performance Standards - read more

P600

LIQUID HEAD / RETAINER MATERIALS

Brass / Hastelloy C
Cast Iron / Hastelloy C
Hastelloy C / Hastelloy C
Polypropylene / Polypropylene
PVDF / PVDF
316L Stainless Steel / Hastelloy C
316L Stainless Steel with ANSI RF Flange 150x600lb / Hastelloy C
316L Stainless Steel with Tri-Clamp Flanges
Duplex Alloy 2205 / Hastelloy C
Super Duplex Alloy 2207 / Hastelloy C

DIAPHRAGM / O-RING MATERIALS

Aflas with PTFE O-Ring (Synthetic Oil)
Buna-N (Standard Oil)
Buna-N (Food Contact Oil)
Buna-N (Synthetic Oil)
Butyl (Standard Oil)
EPDM (EPDM Compatible Oil)
FKM (Standard Oil)
FKM (Food Contact Oil)
FKM (Synthetic Oil)
Neoprene (Standard Oil)
Neoprene (Food Contact Oil)
Neoprene (Synthetic Oil)
PTFE (Food Contact Oil)
PTFE (Synthetic Oil)

VALVE MATERIALS

Valve Spring / Valve & Seat / Valve
Elgiloy / Nitronic 50 / Nitronic 50
Hastelloy C / Hastelloy C / Hastelloy C
Elgiloy / Ceramic / Ceramic
Hastelloy C / Ceramic / Ceramic

CONNECTION PORT

Threaded
Inlet1-1/2" BSPT
Discharge1" BSPT
ANSI (RF)
Inlet150lb RF
Discharge600lb RF
Tri-Clamps
Inlet2" Tri-Camp
Discharge1" Tri-Clamp

NOTE:
Tri-clamp Flanges polished to 0.8 or 0.4 Ra

(Includes polishing of Pump Head, Valve Plate, Valves, Valve Seats, Springs & Retainers,
along with TSE, Passivation, Surface Finish & Weld Procedure Certificates)