Skip to main content
 
 

PERFORMANCE SUMMARY

Max. Discharge P ressure:
Up to 69 Bar metallic
  Up to 17 Bar Polypropylene
Up to 24 Bar PVDF
Max. Inlet  Pressure: Up to 17 Bar
RPM Range: 5 rpm to 840 rpm
Flow Range: 1 L/hr to 255 L/hr

AVAILABLE OPTIONS

  • ATEX
  • Control Freak for Multiple Pump Control
  • Electronic Flow Rate for Safe Zone Installations
  • Mechanical Adjustment Control for ATEX Installations

API 675

Hydra-Cell Metering Solutions pumps meet or exceed API 675 Performance Standards - read   more

 

P200

LIQUID HEAD / RETAINER MATERIALS

Brass / Hastelloy C
Polypropylene / Polypropylene
PDVF / PVDF
316L Stainless Steel / Hastelloy C
316L Stainless Steel ANSI Flanges 300x600lb / Hastelloy C
316L Stainless Steel DIN Flanges PN40 DN20xPN100 DN15 / Hastelloy C
316L Stainless Steel with Tri-Clamp Flanges / Hastelloy C
Hastelloy C / Hastelloy C

DIAPHRAGM / O-RING MATERIALS

Alflas / PTFE o-ring (Synthetic oil)
Aflas / PTFE o-ring & FKM drive case elastomers (Mesamoll oil)
EPDM (EPDM-compatible oil)
FKM (Standard oil)
FKM (Food-contact oil)
FKM (Synthetic oil)
PTFE (Food-contact oil)
PTFE (EPDM oil)
PTFE (Synthetic oil) Note: PTFE diaphragms require flooded suction.
Neoprene (Standard oil)
Neoprene (Food-contact oil)
Neoprene (Synthetic oil)
Buna-N (Standard oil)
Buna-N (Food-contact oil)
Buna-N (Synthetic oil)

VALVE MATERIALS

Valve Spring / Valve & Seat / Valve
Elgiloy / 316L SST / Nitronic 50
Hastelloy C / Hastelloy C / Hastelloy C
Elgiloy / Ceramic / Ceramic
Hastelloy C / Ceramic / Ceramic

CONNECTION PORTS

Threaded
Inlet1/2" BSPT
Discharge3/8" BSPT
ANSI (RF)
Inlet300lb
Discharge600lb
DIN
InletPN40 DN20
DischargePN100 DN15
Tri-Clamp
Inlet1" Tri-Clamp
Discharge3/4" Tri-Clamp

NOTE:
Tri-clamp Flanges polished to 0.8 or 0.4 Ra

(Includes polishing of Pump Head, Valve Plate, Valves, Valve Seats, Springs & Retainers,
along with TSE, Passivation, Surface Finish & Weld Procedure Certificates)