Skip to main content
 
 

PERFORMANCE SUMMARY

G35-M2L
Max. Inlet Pressure: Up to 10 Bar
Max. Discharge Pressure: Up to 10 Bar
Flow Range: 792 - 6360 L/hr
Motor Required: 4kW / IEC 112 
2-Pole / B5

G35-M4L
Max. Inlet Pressure: Up to 17 Bar
Max. Discharge Pressure:  Up to 30 Bar
Flow Range: 396 - 4800 L/hr
Motor Required: 7.5kW / IEC 132
4-Pole / B5

AVAILABLE OPTIONS

  • API 674 Pump Construction
  • API 675 Performance Standard
  • ATEX
  • Oil Cooler for Hot Duties

Hydraulic End:

  • Cast Aluminium (Standard)
  • Ductile Iron

G35 Dosing

LIQUID HEAD MATERIALS

Brass
Cast Iron (Nickel-Plated)
Duplex Alloy 2205
Super Duplex Alloy 2207
316L Stainless Steel - Threaded or SAE Ports
316L Stainless Steel - ANSI RF Flanges 150x600lb
316L Stainless Steel - ANSI RF Flanges 600x1500lb
316L Stainless Steel - Tri-Clamp Ferrules
Hastelloy CW12MW

DIAPHRAGM MATERIALS

Aflas
Buna-N-XS
EPDM (Requires EPDM compatible oil)
FKM
FFKM / PTFE O-Ring
Neoprene
PTFE

VALVE MATERIALS

Ceramic
Hastelloy C
Nitronic 50
Tungsten Carbide
17-4 PH Stainless Steel

CONNECTION PORTS

Threaded
Inlet2-1/2" BSPT
Discharge1-1/4" BSPT
SAE Flanges
Inlet3"
Discharge1-1/4"
ANSI (RF)
Inlet150lb RF
Discharge600lb RF
or
Inlet600lb RF
Discharge1500lb RF
Tri-Clamp - Max. 80 bar
Inlet3"
Discharge1-1/2"

Note:
Tri-Clamp Flanges polished to 0.8 or 0.4 Ra

(Includes polishing of Pump Head, Valve Plate, Valves, Valve Seats, Springs & Retainers, along with TSE, Passivation, Surface Finish & weld Procedure Certificates).