Skip to main content
 
 

PERFORMANCE SUMMARY

G10-M4H
Max. Inlet Pressure: Up to 17 Bar
Max. Discharge Pressure: Up to 100 Bar
Flow Range: 60 - 732 L/hr
Motor Required: 4kW / IEC 112 
4-Pole / B5

G10-M4L
Max. Inlet Pressure: Up to 17 Bar
Max. Discharge Pressure:  Up to 20 Bar
Flow Range: 60 - 732 L/hr
Motor Required: 0.75kW / IEC 80
4-Pole / B14

G10-M2M
Max. Inlet Pressure: Up to 17 Bar
Max. Discharge Pressure: Up to 50 Bar
Flow Range: 120 - 1470 L/hr
Motor Required: 4kW / IEC 112
2-Pole / B5

G10-M2L
Max. Inlet Pressure: Up to 17 Bar
Max. Discharge Pressure: Up to 20 Bar
Flow Range: 120 - 1470 L/hr
Motor Required: 2.2kW / IEC 90
2-Pole / B14

AVAILABLE OPTIONS

  • API 674 Pump Construction
  • API 675 Performance Standard
  • ATEX
  • Oil Cooler for Hot Duties

Hydraulic End:

  • Cast Aluminium (Standard)
  • Ductile Iron

G10 Dosing

LIQUID HEAD MATERIALS     

Brass
Cast Iron (Nickel Plated)
Polypropylene with Hastelloy C followers
Polypropylene with 316L Stainless Steel followers
PVDF with Hastelloy C followers
Duplex Alloy 2205
Super Duplex Alloy 2207
316L Stainless Steel
316L Stainless Steel - ANSI RF Flanges 150x600lb
316L Stainless Steel - Tri-Clamps Ferrules
Hastelloy CW12MW

DIAPHRAGM MATERIALS

Aflas
Buna-N-XS
EPDM
FKM
FFKM / PTFE O-Ring
Neoprene
PTFE

VALVE MATERIALS

Ceramic
Hastelloy C
Nitronic 50
Tungsten Carbide
17-4 PH Stainless Steel

CONNECTION PORT

Threaded
Inlet1" BSPT
Discharge3/4" BSPT
ANSI (RF)
Inlet150lb RF
Discharge600lb RF
Tri-Clamp - Max. 80 bar
Inlet1-1/2"
Discharge1"

NOTE:

Tri-clamp Flanges polished to 0.8 or 0.4 Ra

(Includes polishing of Pump Head, Valve Plate, Valves, Valve Seats, Springs & Retainers,
along with TSE, Passivation, Surface Finish & Weld Procedure Certificates)